Making a Swordsmith Anvil from Scrap

A Japanese swordsmith style anvil made from junkyard scrap. The two side pieces are cast steel or iron John Deere 8255C rear counterweights from a shovel dozer. They weigh about 200-240lbs each and measure about 2 1/8″ x 14 3/4″ x 25″. There is a ‘T’ shaped face and stem that extends to the ground between the plates made from welded spring or tool steel and weighs about 70lbs.

The face is about 1 3/8″ x 6″ x 15 1/4″ and has a pritchel hole in it and a sharp edge for cutting on one corner. The combined weight of the plates bolted onto the face and stem should be between 475 and 520lbs. The finished anvil should sit 7-7.5 sun from the ground or from the seat height. See the whole forge building process here.

Comments are closed.